KeyCreator / Modify / Solid Feature / Unbend All
Use the Unbend All function to unbend a well formed sheet metal part to a flat, planar face. NOTE: The face selected to bend the part to MUST be planar. Using the Function:
Dialog Options:When Unbend All is selected from the Modify>Warp submenu, the following dialog appears:
ParametersSelect either K-Factor, Bend Allowance or Bend Deduction from the drop-down menu. Specify a value in the editable field. If a K-Factor is specified, it will only be used if the selected part is not already marked with K-Factors that had been used to bend it initially. Create These Bend Lines When FlatteningDetermine where to create dashed lines after the part is flattened. Select Start Line, Center Line and/or End Line to specify where the line(s) will be drawn. If you do not wish to create a dashed line at any of the available locations, uncheck the three settings. |