Center and Radius
KeyCreator \ Create \ Arc \ Center-and-Radius

Location: Create>Arc>Center/Radius

Use this feature to create an arc with specified start and end angles, a center position, and a radius.

 

Using the Function:

  1. Select Center/Radius from the Create>Arc submenu.

Note: Before the next step, note that you can create multiple arcs at the same time, if desired. To do this, on the Conversation Bar, enter multiple radii separated by semicolons.

  1. Enter a radius.

  2. Enter a start angle.

  3. Enter an end angle.

  4. Indicate a center position for the arc.