Center and Diameter
KeyCreator \ Create \ Arc \ Center-and-Diameter

Location: Create>Arc>Center/Diameter

Use this feature to create an arc with specified start and end angles, a center position, and a diameter.

 

Using the Function:

  1. Select Center/Diameter from the Create>Arc submenu.

Note: Before the next step, note that you can create multiple arcs at the same time, if desired. To do this, on the Conversation Bar, enter multiple diameters separated by semicolons.

  1. Enter a diameter.

  2. Enter a start angle.

  3. Enter an end angle.

  4. Indicate a center position for the arc.