Offset through a Position
KeyCreator \ Create \ Arc \ Offset-through-a-Position

Location: Create>Arc>Offset Position

Use this feature to create an arc (or circle) offset from a selected arc through a specified position. The new arc will pass through this position.

 

Using the Function:

  1. Select Offset Position from the Create>Arc submenu.

  2. Select the reference curve to base the new arc on.

  3. Select the reference point or position using one of the options from the Universal Position Menu.

NOTE: The Through a Position selection does not have to lie between the start and end angle of the arc.

Above > Example of an arc offset (outside arc) through a position