On Arc
KeyCreator \ Create \ Point \ On-Arc

Location: Create>Point>On Arc

The On Arc function is used to create a point on an arc or circle. Note that the 2D/3D construction mode has no effect on this option.

 

Using the Function:

  1. Select On Arc from the Create>Point submenu.

  2. Select the arc or circle entity.

  3. Enter the angle value at which you want the point to be placed on the selected entity. The point is created in the plane of the arc's depth.

NOTE: The specified angle does not need to lie between the start and end points of the arc, or within the current display plane.


Above > Example of points created using the On Arc function