Sheetmetal Bend Relief
KeyCreator \ Create \ Solid-Feature \ Sheetmetal-Bend-Relief

Location: Create>Solid Feature>Sheetmetal Bend Relief

This function allows you to cut into a specified edge of a solid. . As shown below, the cut has a rounded edge, and protrudes into the solid at the specified depth and width.

Using this Function:

Cut Options

Choose the option that best suits the bend relief.

Width/Depth

Will determine the size of the cut on the sheet metal part.

The function accepts an input depth, width and a target edge on the Conversation Bar

Specify full depth

 

Straight cut to edge plus specified depth

 

End

Choose the depth end condition as either rounded or striaght.

 Note: Use the Modify>Topology>Imprint /Scribe to create edges as needed for the cuts.