GeoTol Dialog Datum Tab
KeyCreator \ Detail \ Symbol \ Geometric-Tolerance \ GeoTol-Dialog-Datum-Tab

GeoTol Dialog Datum Tab

Use the Datum page in the Create a New GeoTol dialog box to create a datum GeoTol. Through this page, you are able to specify Datum Text, Standard, Leader Type and other settings explained below. Using the Datum Attributes page, you can set attributes to be used for the datum GeoTol symbols that you create. The settings contained in this page are identical to those in the Attributes page.

Dialog Options:

image\DETAIL_symbol_geotol_dialog4.gif

Datum Text

Specify the text to be displayed in the datum.

Standard

The Standard selected through the GeoTol will appear here, and cannot be changed unless through the GeoTol. If you intend to set a Standard through the Datum itself, independent of GeoTol, it is recommended that you use the Datum function, explained later in this Symbol segment.

Miscellaneous Options

The settings for both the Use filled arrowheads on leaders and Return to dialog after placing symbol that were set through the GeoTol will appear here, and can only be changed through the GeoTol. Note that these settings are configurable separate of GeoTol through the Datum function.

Leader Type

The Leader Type set through the GeoTol will appear in this box, and can only be changed through the GeoTol. If you intend to set a Leader Type through the Datum itself, it is recommended that you use the Datum function, explained later in this Symbol segment.

  • Above - When selected, the leader will appear above the GeoTol symbol.

  • Below - When selected, the leader type that is selected will appear below the GeoTol symbol.