Dynamic Primitive Block
KeyCreator \ Create \ Primitive-Solid \ Primitive-Dynamic \ Dynamic-Primitive-Block

In this example we will create a block using the Dynamic Primitive function and cursor select the placement. We want to align the block to a previously created one adjacent to the right side but double the original size.

  • Create>Primitive>Dynamic and choose the block option.  For this situation the base should be Corner/Edge and Axis should be the Z-axis. We can uncheck the size for now and dynamically re size with the dynahandle.

     

  • Cursor place the block using the lower corner as indicated here. If you pick the wrong edge you can use the positioning dynahandles to snap to the proper location.

  • Now we will need to use the size dynahandle, right click  on the Z dynahandle and offset a value of 2, then the Y for a value of 10 and X for a value 5. This will double the size of thge block Alternatively we could have just entered the new values in the Primitive Options dialog. Now lets reposition the block so that it is adjacent to the left edge. Right Click on the X position dynahandle and enter an offset of -10 which should move the block from the origin position along the -x 10 units.